Non-linear behaviour of free-edge shallow spherical shells: Effect of the geometry

Non-linear vibrations of free-edge shallow spherical shells are investigated, in order to predict the trend of non-linearity (hardening/softening behaviour) for each mode of the shell, as a function of its geometry. The analog for thin shallow shells of von Kármán's theory for large deflection of plates is used. The main difficulty in predicting the trend of non-linearity relies in the truncation used for the analysis of the partial differential equations (PDEs) of motion. Here, non-linear normal modes through real normal form theory are used. This formalism allows deriving the analytical expression of the coefficient governing the trend of non-linearity. The variation of this coefficient with respect to the geometry of the shell (radius of curvature R, thickness h and outer diameter 2a) is then numerically computed, for axisymmetric as well as asymmetric modes. Plates (obtained as R→∞) are known to display a hardening behaviour, whereas shells generally behave in a softening way. The transition between these two types of non-linearity is clearly studied, and the specific role of 2:1 internal resonances in this process is clarified.     

A UNIFORMLY CONVERGENT DIFFERENCE SCHEME FOR THE SINGULAR PERTURBATION PROBLEM OF A HIGH ORDER ELLIPTIC DIFFERENTIAL EQUATION

ＡＵＮＩＦＯＲＭＬＹＣＯＮＶＥＲＧＥＮＴＤＩＦＦＥＲＥＮＣＥＳＣＨＥＭＥＦＯＲＴＨＥＳＩＮＧＵＬＡＲＰＥＲＴＵＲＢＡＴＩＯＮＰＲＯＢＬＥＭＯＦＡＨＩＧＨＯＲＤＥＲＥＬＬＩＰＴＩＣＤＩＦＦＥＲＥＮＴＩＡＬＥＱＵＡＴＩＯＮ（刘国庆）（苏煜城）ＡＵＮＩＦＯ...     

非线性动力系统的规范形和余维3退化分叉

本文里我们利用矩阵表示法计算了具有Z_(2~-)对称性时非线性动力系统的高阶规范形,求出了余维2退化和余维3退化情况下相应规范形的普适开折。最后利用所得到的规范形和普适开折讨论了非线性动力系统的余维3退化分叉。     

多自由度内共振系统非线性模态的分岔特性

利用多尺度法构造了一个立方非线性1:3内共振系统的内共振非线性模态(NonlinearNormal Modes associated with internal resonance)．研究表明,内共振非线性系统除存在单模态运动外还存在耦合模态运动．耦合内共振模态具有分岔特性．利用奇异性理论对模态分岔方程进行分析发现此类系统的模态存在叉形点分岔和滞后点分岔这两种典型的分岔模式．     

Three-dimensional viscoelastic simulation of coextrusion process: comparison with experimental data

 Three-dimensional numerical simulation of viscoelastic coextrusion process has been performed and numerical results were compared with the experimental data of Karagiannis et al. (1990). By varying the magnitude of the second normal stress difference and its ratio of Fluid I and Fluid II, we were able to control the interface profile and the degree of encapsulation along the downstream direction. By increasing the parameter α (α_Fluid I=α_Fluid II) from 0.1 to 0.4 in the Giesekus model and increasing the α ratio (α_Fluid Iα_Fluid II) between Fluid I and Fluid II from 2.0 to 4.0 in the permissible range of realistic polymeric systems, the interface profile and the degree of encapsulation along the downstream direction were fitted with the experimental results. There was little difference between the numerical results and the experimental data in the interface profile and the degree of encapsulation along the downstream direction when the α ratio was set to 3.0 (0.3:0.1). Fluid I with larger magnitude of the second normal stress difference protrudes into Fluid II with smaller magnitude of the second normal stress difference around the symmetric plane, while Fluid II wraps around Fluid I near the side walls. As the ξ ₁ ratio (ξ _{1 ,Fluid I}ξ _{1 ,Fluid II}) increases from 1.0 to 3.0 for the two-mode Phan-Thien and Tanner model, it was found that the curvature of the interface profile increased, and the difference between the numerical results and the experimental data in the interface profile and the degree of encapsulation along the downstream direction was almost negligible when the ξ ₁ ratio was set to 3.0 (0.54:0.18). Although the parameters of viscoelastic models were fitted by using the shear viscosity data only, quantitative agreements between the numerical results and the experimental coextrusion data were quite satisfactory. Received: 24 April 2001 Accepted: 5 June 2001     

Structural dynamics and stability analysis of 2D-FG microbeams with two-directional porosity distribution and variable material length scale parameter

Abstract

Since the two-directional functionally graded (2D-FG) materials can satisfy the new requirements raised based on the elimination of the stress concentration, delamination and cracking problems accompanying with the low cost and lightweight on the structures without sacrificing the stiffness and strength, the structural analyses of these structures become more important than ever. Moreover, the usage of the micro-electromechanical systems composed of 2D-FG materials has been increasing in automotive, military, space, biomedical, and nuclear energy industries. Within this study, the free vibration and buckling behaviors of 2D-FG porous microbeams are investigated based on the modified couple stress theory by employing a transverse shear-normal deformation beam theory and using finite element method. The effects of the thickness to material length scale parameter (MLSP) accompanying with the micro-porosity volume fraction ratio, boundary condition, aspect ratio, and gradient index on the dimensionless fundamental frequencies and dimensionless critical buckling loads of the 2D-FG porous microbeams are investigated. Moreover, with assumption of the variable material length scale parameters (VMLSP), the computed results are compared with ones obtained by employing constant MLSP. It is found that VMLSP increases the stiffness of the 2D-FG porous microbeams and effects the free vibration and buckling responses of these structures.     

Seismic base isolation by nonlinear mode localization

Summary In this paper, the performance of a nonlinear base-isolation system, comprised of a nonlinearly sprung subfoundation tuned in a 1∶1 internal resonance to a flexible mode of the linear primary structure to be isolated, is examined. The application of nonlinear localization to seismic isolation distinguishes this study from other base-isolation studies in the literature. Under the condition of third-order smooth stiffness nonlinearity, it is shown that a localized nonlinear normal mode (NNM) is induced in the system, which confines energy to the subfoundation and away from the primary or main structure. This is followed by a numerical analysis wherein the smooth nonlinearity is replaced by clearance nonlinearity, and the system is excited by ground motions representing near-field seismic events. The performance of the nonlinear system is compared with that of the corresponding linear system through simulation, and the sensitivity of the isolation system to several design parameters is analyzed. These simulations confirm the existence of the localized NNM, and show that the introduction of simple clearance nonlinearity significantly reduces the seismic energy transmitted to the main structure, resulting in significant attenuation in the response. This work was supported in part by the National Science Foundation Grant CMS 00-00060. The authors are grateful for this support.     

Use of a sliding plate rheometer to measure the first normal stress difference at high shear rates

The use of a sliding plate rheometer (SPR) to determine the first normal stress difference of molten polymers and elastomers at high shear rates is demonstrated. The simple shear flow in this instrument is not subject to the flow instabilities that limit the use of rotational rheometers to shear rates often below 1 s⁻¹. However, issues of secondary flow and wall slip must be addressed to obtain reliable data using an SPR. A highly entangled, monodisperse polybutadiene and a commercial polystyrene were the polymers studied. The inclusion of the polystyrene made it possible to compare data with those obtained by Lodge using a stressmeter, which is an instrument based on the measurement of the hole pressure. The data from the two instruments are in good agreement and are also close to the predictions of an empirical equation of Laun based on the storage and loss moduli.     

PICVib: An accurate,fast, and simple procedure to investigate selected vibrational modes at high theoretical levels

A new approach Procedure for Investigating Categories of Vibrations (PICVib) for estimating vibrational frequencies of selected modes using only the structure and energy calculations at a more demanding computational level is presented and explored. The PICVib has an excellent performance at only a small fraction of the computational demand required for a complete analytical calculation. The errors are smaller than ca. 0.5% when DFT functionals are combined with high level ab initio methods. The approach is general because it can use any quantum chemical program and electronic structure method. It is very robust because it was validated for a wide range of frequency values (ca. 20–4800 cm^–1) and systems: XH₃ (D_3h) with X = B, Al, Ga, N, P, As, O, S, and Se, YH₄ (D_4h) with Y = C, Si, and Ge, conformers of RDX, S_N2 and E2 reactions, [W(dppe)₂(NNC₅H₁₀)] complex, carbon nanotubes, and hydrogen‐bonded complexes including guanine‐cytosine pair. © 2012 Wiley Periodicals, Inc.     

量子点单光子源的光纤耦合

半导体量子点在低温下产生谱线细锐的激子发光可制备单光子源.光纤耦合可避免低温共聚焦装置扫描定位和振动影响,是实现单光子源即插即用和组件化的关键技术.在耦合工艺上,基于微区定位标记发展出拉锥光纤与光子晶体腔或波导侧向耦合、大数值孔径锥形端面光纤与量子点样片垂直耦合等技术;然而,上述工艺需要多维度精密调节以避免柔软光纤的畸形弯曲实现对准和高效耦合.陶瓷插针或石英V槽封装的光纤无弯曲且具有大平滑端面,只要与单量子点样片对准贴合就可保证垂直收光, V槽封装的排式光纤还可通过盲对粘合避免扫描对准,耦合简单.本文在前期排式光纤粘合少对数分布Bragg反射镜(distributed Bragg reflector, DBR)微柱样片实现单光子输出基础上,经理论模拟采用多对数DBR腔提升样片垂直出光和光纤收光效率,使光纤输出单光子计数率大大提升.